Placing the Multi-unit Charger on a Horizontal Surface
The procedure to place either the 5- or 25-unit G6 multi-charger on a horizontal surface, without anchoring it to that surface.
Prior to installing the multi-unit charger, assess the intended installation area to make sure it meets the following criteria:
G6 must be charged in a clean, gas-free environment between 0°C (32°F) and 45°C (113°F).
-
The multi-unit charger must be installed on a horizontal flat, stable surface such as a table, work bench, or desk.
CAUTION:The multi-unit charger should not be installed on vertical surfaces such as a wall without the optional wall bracket (ACC-G6-CHG-05-KIT-XX or ACC-G6-CHG-25-KIT-XX). If you are mounting the multi-unit charger on a wall, refer to Installing the Multi-unit Charger on a Vertical Surface.
- Place the base of the multi-unit charger on a clean, flat, stable surface.
- Plug the 24V AC/DC adapter into the 24V DC input port on the back of the multi-unit charger, then attached the supplied AC power cord to the 24V AC/DC adapter.
- Plug the AC power cord in to an AC outlet with a voltage within the AC input range of the adapter.