Installing the EXO 8 Pump Gas Chamber
If you removed diffusion components from your EXO device, you need to install the pump gas chamber before installing the gas expansion module.
- Attach the pump gas chamber coupling to EXO's inlet tubing.
- Slide the pump gas chamber into the slot and secure the chamber using two screws and washers, ensuring they are snug but not over-tight.
- Insert a multi-gas pump cartridge by sliding it into its slot in the pump gas chamber.
- Place the pump cartridge cover on EXO, ensuring that you properly orient the cover over the front enclosure.
- Tighten the pump cartridge cover screws, ensuring they are snug but not over-tight.
