Selecting Firmware By Device Type
Select the correct firmware file for your device
type and model. If you select the wrong firmware file for your
device, an error message displays in the Status column.
Device-specific firmware selection is based on the device type, Device ID (Unit ID), and model (in some cases), so ensure you have this information when updating.
G7 Firmware
To select G7 firmware, you must identify the device model and Unit ID, then select the correct firmware file for your specific G7 model. Each G7 device model has a unique Unit ID range and requires a specific firmware file.
| G7 Model | Unit ID Range |
|---|---|
| LGX | 3973xxxxxx 3974xxxxxx |
| LGP | 3567xxxxxx 3569xxxxxx |
| LGU | 3975xxxxxx 3976xxxxxx |
| LGL | 35700xxxxx 35702xxxxx 35704xxxxx 35706xxxxx |
| LGR | 35710xxxxx 35712xxxxx 35714xxxxx 35716xxxxx 357180xxxx 357182xxxx 357184xxxx |
Examples
Example 1: If your G7 device has a Unit ID of 3973xxxxxx, it is an LGX model. Select a firmware file ending in LGX.dld.
Example 2: If your G7 device has a Unit ID of 35710xxxxx, it is an LGR model. Select a firmware file ending in LGR.dld.
Key Considerations
Verify your Unit ID and model reference before selecting a firmware file.
If you select the wrong firmware file, the tool displays an error message and prevents the update.
You can only update one G7 model at a time. If you have multiple models (for example, LGL and LGR), update each model separately.
G7 Bridge
This tool does not support non-G7 Bridge R models (for example, Bridge BDL). Only G7 Bridge R models (BDR) are supported.
The Unit ID range for Bridge R is: 35854#####
Select the latest firmware version ending in BDR.dld.