Changing the Metal Clip
Replacing a damaged G8 metal clip ensures G8 remains in good working condition.
To replace the G8 metal clip, you need the items below:
ACC-MC Metal Clip
#0 Philips head screwdriver
Note: Reach out to your Blackline Safety contact to purchase replacement metal clips using the part number ACC-MC.
Note: If G8's plastic retention ears are broken, your device must be sent in for repair.
- Power off G8. For instructions, see Powering off G8.
- Place G8 down on its screen to expose the metal clip.
- Lift open the metal clip cover to reveal a screw in the clip's hole.
- Use the Philips screwdriver to unscrew the metal clip screw from G8.
- Remove the screw and set it aside. Do not discard the screw.
- Slide the broken metal clip upward to remove it.
- Get the replacement metal clip (ACC-MC).
- Slide the bottom of the new clip through G8's clip retention ears.
- Lift open the new clip to expose the screwdriver hole.
- Use the screwdriver to install the screw into the new clip.