Setting Calibration and Bump Test Locks
|
|
This feature locks the device’s screen and all functionality when a bump test or calibration is due on start-up. When locked, you cannot use your G7 in any capacity (including gas readings, SOS latch, messaging) until it has been successfully bump tested or calibrated. |
If the bump test or calibration lock is enabled and becomes due during your shift, your device does not lock as long as it is not power cycled. Your G7 notifies you that a bump test or calibration is due and a message displays in the banner, but the device remains fully functional.
If the bump test or calibration lock is enabled and becomes due during your shift, and you power cycle your device, your device locks.
The calibration or bump test lock can be enabled from G7’s configuration profile in Blackline Live. For more information, contact your Blackline Live administrator.
