To plug a cartridge into the Workbench Cartridge Warmer, you must first remove the cartridge from G7, G8, or EXO. For more information, refer to Installing and Replacing Cartridges.
Place the cartridge into one of the Workbench Cartridge Warmer's open slots, ensuring the power and data contacts on both devices are aligned.
Gently push the cartridge downward to secure it into the warmer.
If properly connected, the cartridge's lights turn on.
For optimal results, you must transfer the cartridge to a G7, G8, or EXO device within 30 seconds of unplugging it from the Workbench Cartridge Warmer.
