Cartridge Presence and Fault Detection
When powered on, the device verifies that a valid cartridge is
installed and ready for operation. If no cartridge is detected, or
if a cartridge fault is identified, a high-urgency notification
triggers. Gas sampling does not start.
G7/G8: Cartridge check performed automatically during start-up.
EXO: Cartridge check performed automatically during setup wizard.
If a cartridge fault is detected, the device may need to be restarted. If the fault persists after restart, the cartridge must be replaced.
Note:
If a cartridge fault prevents start-up, it must be cleared before gas detection can begin.
