Alarm Test
EXO’s alarm test is an audio/visual assessment used to ensure the siren, speaker, LED lights, and microphones are operating correctly. The top lights flash and the notification pitch increases. You cannot adjust the volume of alarm test sounds.
An alarm test is run at the following times:
During the start-up sequence
Before a bump test
Before a calibration
If EXO detects a problem while running the alarm test, it immediately tries to run the full test two more times. If EXO still detects a problem after the third try, the failed alarm test results are recorded and sent to Blackline Live.
Note:
Muffling the speaker during an alarm test results in a failure. The test also fails if the environment is too loud.
