New Cartridge F2 Coming May 1, 2025
Blackline Safety is releasing a new cartridge to support enhanced performance standards for LEL sensors.
Blackline Safety will begin shipping our new Cartridge F2 for diffusion devices starting May 1, 2025. This update follows our certification on a new performance standard for LEL sensors. Your device behavior will remain unchanged when using the new cartridge and you will not notice any differences in day-to-day operation as long as your firmware is up to date.
Important Information
G7 and EXO 8 diffusion devices shipping after May 1, 2025 will include Cartridge F2.
Pumped device variants will transition to the new cartridge in the coming months.
Replacement cartridges will gradually transition from legacy cartridges to Cartridge F2 as legacy supply depletes.
Device Compatibility Requirements
Your device must be running the following minimum firmware version to work with Cartridge F2:
G7c: version 3.501 or higher
G7x&Bridge: version 3.501 or higher
G7 EXO: version 3.501 or higher
EXO 8: version 4.0 or higher
You can check your current firmware version by following these instructions.
Note for G7 3G Device Owners
G7 3G devices (with IDs starting with 3566, 3567, 3568, or 3569) are not compatible with firmware 3.501 and must be upgraded. Please contact Technical Support or your Client Success Manager for assistance.
Technical Support
Contact details for the Blackline Safety Technical Support team.
Need help? Our Technical Support team is available 24/7 to assist you.
North America
Toll Free: 1-877-869-7212 | mailto:support@blacklinesafety.com
United Kingdom
+44 1787222684 | mailto:eusupport@blacklinesafety.com
International
+1-403-451-0327 | mailto:support@blacklinesafety.com