This feature locks the device's screen and all functionality when a bump test or calibration is due on start-up

This feature locks the device's screen and all functionality when a bump test or calibration is due on start-up. When locked, you cannot use your G8 in any capacity (including gas readings, SOS latch, messaging) until it has been successfully bump tested or calibrated.

If the bump test or calibration lock is enabled and becomes due during your shift, your device does not lock unless it is power cycled. Your G8 notifies you that a bump test or calibration is due, and a message displays in the banner, but the device remains fully functional.

If the bump test or calibration lock is enabled and becomes due during your shift, and you power cycle your device, your device locks.

The calibration or bump test lock can be enabled from G8's configuration profile in Blackline Live. For more information, contact your Blackline Live administrator.