home

G7

G6G7G8EXOCartridges and SensorsLocation BeaconBlackline LiveBlackline AnalyticsLoner MobileNotifications
G6G7G8EXOCartridges and SensorsLocation BeaconBlackline LiveBlackline AnalyticsLoner MobileNotifications

Help Center

Search the Help Center

Show Contents

thumbnailG7

Operation

Pairing G7x Devices

G7 Bridge is pre-programmed to specifically pair with your G7x devices. G7 Bridge can connect to up to five G7x devices at one time.

  1. Press OK to open G7 Bridge’s menu.
  2. Use the up and down arrows to navigate to Pair new devices, then press OK.
  3. Use the up and down arrows to navigate to Start, then press OK.
    G7 Bridge's screen shows "Pairing started" as it looks for devices.
  4. Power on the G7x devices that you want to pair. G7 Bridge pairs with the G7x devices. When the devices are paired, the following occurs:

    • G7 Bridge's main screen shows that it has connected devices.

    • The low urgency notification on G7x turns off.

    • The green connectivity light on connected G7x devices is solid.

    • G7 Bridge screen shows a "Pairing succeeded" message and the Bridge network key.

  5. If you are pairing more than five G7x devices, repeat steps 2 to 4 until all G7x devices are successfully paired.
    Note: More G7 Bridge devices are needed to pair additional G7x devices. One G7 Bridge can pair with up to five G7x devices.
G7 Bridge

Last updated: January 27, 2026