Steps to test the success of the installation of the G7 Bridge hardwire cable to an ignition-switched circuit.

1. Check that the ignition key is in the OFF position. G7 Bridge may be powered OFF or ON.
2. Check that the red Charging light on the front of G7 Bridge is OFF. If the Charging light is blinking or ON steadily, the hardwire cable is connected to a non-switched vehicle circuit—recheck the wiring.
3. Turn the ignition key to the ON position. The Charging light should begin to blink or be a steady red. If the light does not turn on, recheck the wiring.